Monday, 17 August 2009

Sexy Pictures of beautiful girls





















DisneylandTimes Square in New York City, United StatesThe Brandenburg Gate in Berlin, GermanyGreat Wall of ChinaColosseum in Rome, ItalyTaj Mahal in Agra, IndiaThe Giza pyramid complex in EgyptNeuschwanstein Castle in Bavaria, GermanyThe Temple of the Emerald Buddha – royal chapel within the Grand Palace, Bangkok, Thailand.Christ the Redeemer in Rio de Janeiro, BrazilTourism is travel for recreational, leisure or business purposes. The World Tourism Organization defines tourists as people who "travel to and stay in places outside their usual environment for more than twenty-four (24) hours and not more than one consecutive year for leisure, business and other purposes not related to the exercise of an activity remunerated from within the place visited".[3] Tourism has become a popular global leisure activity. In 2007, there were over 903 million international tourist arrivals, with a growth of 6.6% as compared to 2006. International tourist receipts were USD 856 billion in 2007.[4]Despite the uncertainties in the global economy, international tourist arrivals during the first four months of 2008 followed a similar growth trend than the same period in 2007.[4] However, as a result of the economic crisis of 2008, international travel demand suffered a strong slowdown beginning in June 2008, with growth in international tourism arrivals worldwide falling to 2% during the boreal summer months, while growth from January to April 2008 had reached an average 5.7% compared to its 2007 level. Growth from 2006 to 2007 was only 3.7%, as total international tourism arrivals from January to August were 641 million tourists, up from 618 million in the same period in 2007.[5]Tourism is vital for many countries, such as the U.A.E, Egypt, Greece and Thailand, and many island nations, such as The Bahamas, Fiji, Maldives and the Seychelles, due to the large intake of money for businesses with their goods and services and the opportunity for employment in the service industries associated with tourism. These service industries include transportation services, such as airlines, cruise ships and taxis, hospitality services, such as accommodations, including hotels and resorts, and entertainment venues, such as amusement parks, casinos, shopping malls, various music venues and the theatre.DefinitionHunziker and Krapf, in 1941, defined tourism as people who travel "the sum of the phenomena and relationships arising from the travel and stay of non-residents, insofar as they do not lead to permanent residence and are not connected with any earning activity."[6] In 1976, the Tourism Society of England's definition was: "Tourism is the temporary, short-term movement of people to destination outside the places where they normally live and work and their activities during the stay at each destination. It includes movements for all purposes."[citation needed] In 1981, the International Association of Scientific Experts in Tourism defined tourism in terms of particular activities selected by choice and undertaken outside the home.[7]The United Nations classified three forms of tourism in 1994, in its "Recommendations on Tourism Statistics: Domestic tourism", which involves residents of the given country traveling only within this country; Inbound tourism, involving non-residents traveling in the given country; and Outbound tourism, involving residents traveling in another country.[citation needed] The UN also derived different categories of tourism by combining the three basic forms of tourism: Internal tourism, which comprises domestic tourism and inbound tourism; National tourism, which comprises domestic tourism and outbound tourism; and International tourism, which consists of inbound tourism and outbound tourism. Intrabound tourism is a term coined by the Korea Tourism Organization and widely accepted in orea.[citation needed] Intrabound tourism differs from domestic tourism in that the former encompasses policymaking and implementation of national tourism policies.[citation needed]Recently, the tourism industry has shifted from the promotion of inbound tourism to the promotion of intrabound tourism, because many countries are experiencing tough competition for inbound tourists.[citation needed] Some national policymakers have shifted their priority to the promotion of intrabound tourism to contribute to the local economy. Examples of such campaigns include: "See America" in the United States; "Truly Asia" in Malaysia; "Get Going Canada" in Canada; "Peru. Live the Legend" in Peru; "Wow Philippines" in the Philippines; "Uniquely Singapore" in Singapore; "100% Pure New Zealand" in New Zealand; "Amazing Thailand" in Thailand; "Incredible India" in India; and "The Hidden Charm" in Vietnam.[citation needed]HistoryKinkaku-ji, the Golden Pavilion temple in Kyoto, Japan.Dubai, UAEThe Matterhorn, near Zermatt in the Swiss Alps.The Great Bath at the Roman Baths in Bath, Somerset, one of the world's first health tourism sites.Ski jumping hill in Karpacz, PolandWealthy people have always traveled to distant parts of the world, to see great buildings, works of art, learn new languages, experience new cultures and to taste different cuisines. Long ago, at the time of the Roman Republic, places such as Baiae, were popular coastal resorts for the rich. The word tourism was used by 1811 and tourist by 1840.[19] In 1936, the League of Nations defined foreign tourist as "someone travelling abroad for at least twenty-four hours". Its successor, the United Nations, amended this definition in 1945, by including a maximum stay of six months.[20][edit] Leisure travelLeisure travel was associated with the Industrial Revolution in the United Kingdom – the first European country to promote leisure time to the increasing industrial population.[citation needed] Initially, this applied to the owners of the machinery of production, the economic oligarchy, the factory owners and the traders. These comprised the new middle class. Cox & Kings was the first official travel company to be formed in 1758.[21]The British origin of this new industry is reflected in many place names. In Nice, France, one of the first and best-established holiday resorts on the French Riviera, the long esplanade along the seafront is known to this day as the Promenade des Anglais; in many other historic resorts in continental Europe, old, well-established palace hotels have names like the Hotel Bristol, the Hotel Carlton or the Hotel Majestic – reflecting the dominance of English customers.Many leisure-oriented tourists travel to the tropics, both in the summer and winter. Places often visited are: Cuba, the Dominican Republic, Thailand, North Queensland in Australia and Florida in the United States.[edit] Winter tourismMajor ski resorts are located in the various European countries (e.g. Austria, Czech Republic, France, Germany, Italy, Norway, Poland, Slovakia, Spain, Switzerland), Canada, the United States, Australia, New Zealand, Japan, Korea, Chile and Argentina.[edit] Mass tourismMass tourism could only have developed with the improvements in technology, allowing the transport of large numbers of people in a short space of time to places of leisure interest, so that greater numbers of people began to enjoy the benefits of leisure time.In the United States, the first great seaside resort, in the European style, was Atlantic City, New Jersey and Long Island, New York.In continental Europe, early resorts included: Ostend, popularized by the people of Brussels; Boulogne-sur-Mer (Pas-de-Calais) and Deauville (Calvados) for the Parisians; and Heiligendamm, founded in 1797, as the first seaside resort at the Baltic Sea.[edit] Adjectival tourismsSee also: List of adjectival tourismsAdjectival tourism refers to the numerous niche or specialty travel forms of tourism that have emerged over the years, each with its own adjective. Many of these have come into common use by the tourism industry and academics.[citation needed] Others are emerging concepts that may or may not gain popular usage. Examples of the more common niche tourism markets include:Recent developmentsRed Square in Moscow, Russia.Iguazu Falls on the Argentina-Brazil borderGalápagos Islands, EcuadorPragueBuenos AiresN Seoul Tower in South Korea.There has been an upmarket trend in the tourism over the last few decades, especially in Europe, where international travel for short breaks is common.[citation needed] Tourists have higher levels of disposable income and greater leisure time and they are also better-educated and have more sophisticated tastes.[citation needed] There is now a demand for a better quality products, which has resulted in a fragmenting of the mass market for beach vacations; people want more specialised versions, such as Club 18-30, quieter resorts, family-oriented holidays or niche market-targeted destination hotels.The developments in technology and transport infrastructure, such as jumbo jets, low-cost airlines and more accessible airports have made many types of tourism more affordable. There have also been changes in lifestyle, such as retiree-age people who sustain year round tourism. This is facilitated by internet sales of tourism products. Some sites have now started to offer dynamic packaging, in which an inclusive price is quoted for a tailor-made package requested by the customer upon impulse.There have been a few setbacks in tourism, such as the September 11 attacks and terrorist threats to tourist destinations, such as in Bali and several European cities. Also, on December 26, 2004, a tsunami, caused by the 2004 Indian Ocean earthquake, hit the Asian countries on the Indian Ocean, including the Maldives. Thousands of lives were lost and many tourists died. This, together with the vast clean-up operation in place, has stopped or severely hampered tourism to the area.The terms tourism and travel are sometimes used interchangeably. In this context, travel has a similar definition to tourism, but implies a more purposeful journey. The terms tourism and tourist are sometimes used pejoratively, to imply a shallow interest in the cultures or locations visited by tourists.[edit] Sustainable tourism"Sustainable tourism is envisaged as leading to management of all resources in such a way that economic, social and aesthetic needs can be fulfilled while maintaining cultural integrity, essential ecological processes, biological diversity and life support systems." (World Tourism Organization)Sustainable development implies "meeting the needs of the present without compromising the ability of future generations to meet their own needs" (World Commission on Environment and Development, 1987)[22][edit] Eco-tourismMain article: Eco-tourism[edit] Medical tourismMain article: Medical tourismWhen there is a significant price difference between countries for a given medical procedure, particularly in Southeast Asia, India, Eastern Europe and where there are different regulatory regimes, in relation to particular medical procedures (e.g. dentistry), travelling to take advantage of the price or regulatory differences is often referred to as "medical tourism".[edit] Educational tourismEducational tourism developed, because of the growing popularity of teaching and learning of knowledge and the enhancing of technical competency outside of the classroom environment.[citation needed] In educational tourism, the main focus of the tour or leisure activity includes visiting another country to learn about the culture, such as in Student Exchange Programs and Study Tours, or to work and apply skills learned inside the classroom in a different environment, such as in the International Practicum Training Program.[edit] Other developments[edit] Creative tourismCreative tourism has existed as a form of cultural tourism, since the early beginnings of tourism itself. Its European roots date back to the time of the Grand Tour, which saw the sons of aristocratic families traveling for the purpose of mostly interactive, educational experiences. More recently, creative tourism has been given its own name by Crispin Raymond and Greg Richards[citation needed], who as members of the Association for Tourism and Leisure Education (ATLAS), have directed a number of projects for the European Commission, including cultural and crafts tourism, known as sustainable tourism. They have defined "creative tourism" as tourism related to the active participation of travelers in the culture of the host community, through interactive workshops and informal learning experiences.[citation needed]Meanwhile, the concept of creative tourism has been picked up by high-profile organizations such as UNESCO, who through the Creative Cities Network, have endorsed creative tourism as an engaged, authentic experience that promotes an active understanding of the specific cultural features of a place.[citation needed]More recently, creative tourism has gained popularity as a form of cultural tourism, drawing on active participation by travelers in the culture of the host communities they visit. Several countries offer examples of this type of tourism development, including the United Kingdom, the Bahamas, Jamaica, Spain, Italy and New Zealand.[edit] Dark tourismOne emerging area of special interest tourism has been identified by Lennon and Foley (2000)[citation needed] as "dark" tourism. This type of tourism involves visits to "dark" sites, such as battlegrounds, scenes of horrific crimes or acts of genocide, for example: concentration camps. Dark tourism poses severe ethical and moral dilemmas: should these sites be available for visitation and, if so, what should the nature of the publicity involved be. Dark tourism remains a small niche market, driven by varied motivations, such as mourning, remembrance, macabre curiosity or even entertainment. Its early origins are rooted in fairgrounds and medieval fairs.[23][edit] Growthnternational tourism receipts in 2005he Hagia Sophia – originally a church, later a mosque, now a museum in Istanbul, Turkey.The World Tourism Organization (UNWTO) forecasts that international tourism will continue growing at the average annual rate of 4 %.[24] By 2020 Europe will remain the most popular destination, but its share will drop from 60% in 1995 to 46%. Long-haul will grow slightly faster than intraregional travel and by 2020 its share will increase from 18% in 1995 to 24%.[citation needed]With the advent of e-commerce, tourism products have become one of the most traded items on the internet.[citation needed] Tourism products and services have been made available through intermediaries, although tourism providers (hotels, airlines, etc.) can sell their services directly. This has put pressure on intermediaries from both on-line and traditional shops.It has been suggested there is a strong correlation between Tourism expenditure per capita and the degree to which countries play in the global context.[25] Not only as a result of the important economic contribution of the tourism industry, but also as an indicator of the degree of confidence with which global citizens leverage the resources of the globe for the benefit of their local economies. This is why any projections of growth in tourism may serve as an indication of the relative influence that each country will exercise in the future.Space tourism is expected to "take off" in the first quarter of the 21st century, although compared with traditional destinations the number of tourists in orbit will remain low until technologies such as a space elevator make space travel cheap.[citation needed]Technological improvement is likely to make possible air-ship hotels, based either on solar-powered airplanes or large dirigibles.[citation needed] Underwater hotels, such as Hydropolis, expected to open in Dubai in 2009, will be built. On the ocean, tourists will be welcomed by ever larger cruise ships and perhaps floating cities.[citation needed][edit] Latest trendsAs a result of the economic crisis of 2008, international arrivals suffered a strong slowdown beginning in June 2008. Growth from 2007 to 2008 was only 3.7% during the first eight months of 2008. The Asian and Pacific markets were affected and Europe stagnated during the boreal summer months, while the Americas performed better, reducing their expansion rate but keeping a 6% growth from January to August 2008. Only the Middle East continued its rapid growth during the same period, reaching a 17% growth as compared to the same period in 2007.[5] This slowdown on international tourism demand was also reflected in the air transport industry, with a negative growth in September 2008 and a 3.3% growth in passenger traffic through September. The hotel industry also reports a slowdown, as room occupancy continues to decline.[5] As the global economic situation deteriorated dramatically during September and October as a result of the global financial crisis, growth of international tourism is expected to slow even further for the remaining of 2008, and this slowdown in demand growth is forecasted to continue into 2009 as recession has already hit most of the top spender countries, with long-haul travel expected to be the most affected by the economic crisis.[5]. However, some travel destinations have experienced growth during hard economic times, drawing on low costs of living, accessibility, and friendly immigration laws permitting tourists to stay for extended periods of time. Recession tourism, a phrase coined by Matt Landau in his research about Panama, has evolved as an alternative escape option for nervous crisis-goers in 2009.[citation needed]According to the Bureau of Economic Analysis, direct tourism employment comprises all jobs where the workers are engaged in the production of direct tourism output (such as hotel staff, airline pilots, and souvenir sellers). In the third quarter of 2008, tourism-related employment of 8.6 million jobs in the US consisted of 5.9 million (69%) direct tourism jobs—jobs where workers produce goods and services sold directly to visitors—and 2.7 million (31%) indirect tourism-related jobs. Indirect tourism refers to jobs where workers produce goods and services used to produce what visitors buy. As the US economy struggled, in the fourth quarter of 2008, passenger air transportation continued to contract—falling 13.0% in 2008, after decreasing 20.0% in the third quarter. Spending on domestic flights declined for the fifth consecutive quarter but real spending on international flights rose a modest 1.0% after a sharp decline of 35.4%in the previous quarter. [26]In the USA in 2008, revenue in the tourism industry fell by 3.5% to $1.31 trillion dollars. While still a large amount, tourism revenue fell as unemployment in the country and around the world rose and the international economic recession led to the cancellation of planned trips, including trips to US. [27][edit] Negative impacts This section requires

Beautiful good looking Housewives and girls



















DisneylandTimes Square in New York City, United StatesThe Brandenburg Gate in Berlin, GermanyGreat Wall of ChinaColosseum in Rome, ItalyTaj Mahal in Agra, IndiaThe Giza pyramid complex in EgyptNeuschwanstein Castle in Bavaria, GermanyThe Temple of the Emerald Buddha – royal chapel within the Grand Palace, Bangkok, Thailand.Christ the Redeemer in Rio de Janeiro, BrazilTourism is travel for recreational, leisure or business purposes. The World Tourism Organization defines tourists as people who "travel to and stay in places outside their usual environment for more than twenty-four (24) hours and not more than one consecutive year for leisure, business and other purposes not related to the exercise of an activity remunerated from within the place visited".[3] Tourism has become a popular global leisure activity. In 2007, there were over 903 million international tourist arrivals, with a growth of 6.6% as compared to 2006. International tourist receipts were USD 856 billion in 2007.[4]Despite the uncertainties in the global economy, international tourist arrivals during the first four months of 2008 followed a similar growth trend than the same period in 2007.[4] However, as a result of the economic crisis of 2008, international travel demand suffered a strong slowdown beginning in June 2008, with growth in international tourism arrivals worldwide falling to 2% during the boreal summer months, while growth from January to April 2008 had reached an average 5.7% compared to its 2007 level. Growth from 2006 to 2007 was only 3.7%, as total international tourism arrivals from January to August were 641 million tourists, up from 618 million in the same period in 2007.[5]Tourism is vital for many countries, such as the U.A.E, Egypt, Greece and Thailand, and many island nations, such as The Bahamas, Fiji, Maldives and the Seychelles, due to the large intake of money for businesses with their goods and services and the opportunity for employment in the service industries associated with tourism. These service industries include transportation services, such as airlines, cruise ships and taxis, hospitality services, such as accommodations, including hotels and resorts, and entertainment venues, such as amusement parks, casinos, shopping malls, various music venues and the theatre.DefinitionHunziker and Krapf, in 1941, defined tourism as people who travel "the sum of the phenomena and relationships arising from the travel and stay of non-residents, insofar as they do not lead to permanent residence and are not connected with any earning activity."[6] In 1976, the Tourism Society of England's definition was: "Tourism is the temporary, short-term movement of people to destination outside the places where they normally live and work and their activities during the stay at each destination. It includes movements for all purposes."[citation needed] In 1981, the International Association of Scientific Experts in Tourism defined tourism in terms of particular activities selected by choice and undertaken outside the home.[7]The United Nations classified three forms of tourism in 1994, in its "Recommendations on Tourism Statistics: Domestic tourism", which involves residents of the given country traveling only within this country; Inbound tourism, involving non-residents traveling in the given country; and Outbound tourism, involving residents traveling in another country.[citation needed] The UN also derived different categories of tourism by combining the three basic forms of tourism: Internal tourism, which comprises domestic tourism and inbound tourism; National tourism, which comprises domestic tourism and outbound tourism; and International tourism, which consists of inbound tourism and outbound tourism. Intrabound tourism is a term coined by the Korea Tourism Organization and widely accepted in orea.[citation needed] Intrabound tourism differs from domestic tourism in that the former encompasses policymaking and implementation of national tourism policies.[citation needed]Recently, the tourism industry has shifted from the promotion of inbound tourism to the promotion of intrabound tourism, because many countries are experiencing tough competition for inbound tourists.[citation needed] Some national policymakers have shifted their priority to the promotion of intrabound tourism to contribute to the local economy. Examples of such campaigns include: "See America" in the United States; "Truly Asia" in Malaysia; "Get Going Canada" in Canada; "Peru. Live the Legend" in Peru; "Wow Philippines" in the Philippines; "Uniquely Singapore" in Singapore; "100% Pure New Zealand" in New Zealand; "Amazing Thailand" in Thailand; "Incredible India" in India; and "The Hidden Charm" in Vietnam.[citation needed]HistoryKinkaku-ji, the Golden Pavilion temple in Kyoto, Japan.Dubai, UAEThe Matterhorn, near Zermatt in the Swiss Alps.The Great Bath at the Roman Baths in Bath, Somerset, one of the world's first health tourism sites.Ski jumping hill in Karpacz, PolandWealthy people have always traveled to distant parts of the world, to see great buildings, works of art, learn new languages, experience new cultures and to taste different cuisines. Long ago, at the time of the Roman Republic, places such as Baiae, were popular coastal resorts for the rich. The word tourism was used by 1811 and tourist by 1840.[19] In 1936, the League of Nations defined foreign tourist as "someone travelling abroad for at least twenty-four hours". Its successor, the United Nations, amended this definition in 1945, by including a maximum stay of six months.[20][edit] Leisure travelLeisure travel was associated with the Industrial Revolution in the United Kingdom – the first European country to promote leisure time to the increasing industrial population.[citation needed] Initially, this applied to the owners of the machinery of production, the economic oligarchy, the factory owners and the traders. These comprised the new middle class. Cox & Kings was the first official travel company to be formed in 1758.[21]The British origin of this new industry is reflected in many place names. In Nice, France, one of the first and best-established holiday resorts on the French Riviera, the long esplanade along the seafront is known to this day as the Promenade des Anglais; in many other historic resorts in continental Europe, old, well-established palace hotels have names like the Hotel Bristol, the Hotel Carlton or the Hotel Majestic – reflecting the dominance of English customers.Many leisure-oriented tourists travel to the tropics, both in the summer and winter. Places often visited are: Cuba, the Dominican Republic, Thailand, North Queensland in Australia and Florida in the United States.[edit] Winter tourismMajor ski resorts are located in the various European countries (e.g. Austria, Czech Republic, France, Germany, Italy, Norway, Poland, Slovakia, Spain, Switzerland), Canada, the United States, Australia, New Zealand, Japan, Korea, Chile and Argentina.[edit] Mass tourismMass tourism could only have developed with the improvements in technology, allowing the transport of large numbers of people in a short space of time to places of leisure interest, so that greater numbers of people began to enjoy the benefits of leisure time.In the United States, the first great seaside resort, in the European style, was Atlantic City, New Jersey and Long Island, New York.In continental Europe, early resorts included: Ostend, popularized by the people of Brussels; Boulogne-sur-Mer (Pas-de-Calais) and Deauville (Calvados) for the Parisians; and Heiligendamm, founded in 1797, as the first seaside resort at the Baltic Sea.[edit] Adjectival tourismsSee also: List of adjectival tourismsAdjectival tourism refers to the numerous niche or specialty travel forms of tourism that have emerged over the years, each with its own adjective. Many of these have come into common use by the tourism industry and academics.[citation needed] Others are emerging concepts that may or may not gain popular usage. Examples of the more common niche tourism markets include:Recent developmentsRed Square in Moscow, Russia.Iguazu Falls on the Argentina-Brazil borderGalápagos Islands, EcuadorPragueBuenos AiresN Seoul Tower in South Korea.There has been an upmarket trend in the tourism over the last few decades, especially in Europe, where international travel for short breaks is common.[citation needed] Tourists have higher levels of disposable income and greater leisure time and they are also better-educated and have more sophisticated tastes.[citation needed] There is now a demand for a better quality products, which has resulted in a fragmenting of the mass market for beach vacations; people want more specialised versions, such as Club 18-30, quieter resorts, family-oriented holidays or niche market-targeted destination hotels.The developments in technology and transport infrastructure, such as jumbo jets, low-cost airlines and more accessible airports have made many types of tourism more affordable. There have also been changes in lifestyle, such as retiree-age people who sustain year round tourism. This is facilitated by internet sales of tourism products. Some sites have now started to offer dynamic packaging, in which an inclusive price is quoted for a tailor-made package requested by the customer upon impulse.There have been a few setbacks in tourism, such as the September 11 attacks and terrorist threats to tourist destinations, such as in Bali and several European cities. Also, on December 26, 2004, a tsunami, caused by the 2004 Indian Ocean earthquake, hit the Asian countries on the Indian Ocean, including the Maldives. Thousands of lives were lost and many tourists died. This, together with the vast clean-up operation in place, has stopped or severely hampered tourism to the area.The terms tourism and travel are sometimes used interchangeably. In this context, travel has a similar definition to tourism, but implies a more purposeful journey. The terms tourism and tourist are sometimes used pejoratively, to imply a shallow interest in the cultures or locations visited by tourists.[edit] Sustainable tourism"Sustainable tourism is envisaged as leading to management of all resources in such a way that economic, social and aesthetic needs can be fulfilled while maintaining cultural integrity, essential ecological processes, biological diversity and life support systems." (World Tourism Organization)Sustainable development implies "meeting the needs of the present without compromising the ability of future generations to meet their own needs" (World Commission on Environment and Development, 1987)[22][edit] Eco-tourismMain article: Eco-tourism[edit] Medical tourismMain article: Medical tourismWhen there is a significant price difference between countries for a given medical procedure, particularly in Southeast Asia, India, Eastern Europe and where there are different regulatory regimes, in relation to particular medical procedures (e.g. dentistry), travelling to take advantage of the price or regulatory differences is often referred to as "medical tourism".[edit] Educational tourismEducational tourism developed, because of the growing popularity of teaching and learning of knowledge and the enhancing of technical competency outside of the classroom environment.[citation needed] In educational tourism, the main focus of the tour or leisure activity includes visiting another country to learn about the culture, such as in Student Exchange Programs and Study Tours, or to work and apply skills learned inside the classroom in a different environment, such as in the International Practicum Training Program.[edit] Other developments[edit] Creative tourismCreative tourism has existed as a form of cultural tourism, since the early beginnings of tourism itself. Its European roots date back to the time of the Grand Tour, which saw the sons of aristocratic families traveling for the purpose of mostly interactive, educational experiences. More recently, creative tourism has been given its own name by Crispin Raymond and Greg Richards[citation needed], who as members of the Association for Tourism and Leisure Education (ATLAS), have directed a number of projects for the European Commission, including cultural and crafts tourism, known as sustainable tourism. They have defined "creative tourism" as tourism related to the active participation of travelers in the culture of the host community, through interactive workshops and informal learning experiences.[citation needed]Meanwhile, the concept of creative tourism has been picked up by high-profile organizations such as UNESCO, who through the Creative Cities Network, have endorsed creative tourism as an engaged, authentic experience that promotes an active understanding of the specific cultural features of a place.[citation needed]More recently, creative tourism has gained popularity as a form of cultural tourism, drawing on active participation by travelers in the culture of the host communities they visit. Several countries offer examples of this type of tourism development, including the United Kingdom, the Bahamas, Jamaica, Spain, Italy and New Zealand.[edit] Dark tourismOne emerging area of special interest tourism has been identified by Lennon and Foley (2000)[citation needed] as "dark" tourism. This type of tourism involves visits to "dark" sites, such as battlegrounds, scenes of horrific crimes or acts of genocide, for example: concentration camps. Dark tourism poses severe ethical and moral dilemmas: should these sites be available for visitation and, if so, what should the nature of the publicity involved be. Dark tourism remains a small niche market, driven by varied motivations, such as mourning, remembrance, macabre curiosity or even entertainment. Its early origins are rooted in fairgrounds and medieval fairs.[23][edit] Growthnternational tourism receipts in 2005he Hagia Sophia – originally a church, later a mosque, now a museum in Istanbul, Turkey.The World Tourism Organization (UNWTO) forecasts that international tourism will continue growing at the average annual rate of 4 %.[24] By 2020 Europe will remain the most popular destination, but its share will drop from 60% in 1995 to 46%. Long-haul will grow slightly faster than intraregional travel and by 2020 its share will increase from 18% in 1995 to 24%.[citation needed]With the advent of e-commerce, tourism products have become one of the most traded items on the internet.[citation needed] Tourism products and services have been made available through intermediaries, although tourism providers (hotels, airlines, etc.) can sell their services directly. This has put pressure on intermediaries from both on-line and traditional shops.It has been suggested there is a strong correlation between Tourism expenditure per capita and the degree to which countries play in the global context.[25] Not only as a result of the important economic contribution of the tourism industry, but also as an indicator of the degree of confidence with which global citizens leverage the resources of the globe for the benefit of their local economies. This is why any projections of growth in tourism may serve as an indication of the relative influence that each country will exercise in the future.Space tourism is expected to "take off" in the first quarter of the 21st century, although compared with traditional destinations the number of tourists in orbit will remain low until technologies such as a space elevator make space travel cheap.[citation needed]Technological improvement is likely to make possible air-ship hotels, based either on solar-powered airplanes or large dirigibles.[citation needed] Underwater hotels, such as Hydropolis, expected to open in Dubai in 2009, will be built. On the ocean, tourists will be welcomed by ever larger cruise ships and perhaps floating cities.[citation needed][edit] Latest trendsAs a result of the economic crisis of 2008, international arrivals suffered a strong slowdown beginning in June 2008. Growth from 2007 to 2008 was only 3.7% during the first eight months of 2008. The Asian and Pacific markets were affected and Europe stagnated during the boreal summer months, while the Americas performed better, reducing their expansion rate but keeping a 6% growth from January to August 2008. Only the Middle East continued its rapid growth during the same period, reaching a 17% growth as compared to the same period in 2007.[5] This slowdown on international tourism demand was also reflected in the air transport industry, with a negative growth in September 2008 and a 3.3% growth in passenger traffic through September. The hotel industry also reports a slowdown, as room occupancy continues to decline.[5] As the global economic situation deteriorated dramatically during September and October as a result of the global financial crisis, growth of international tourism is expected to slow even further for the remaining of 2008, and this slowdown in demand growth is forecasted to continue into 2009 as recession has already hit most of the top spender countries, with long-haul travel expected to be the most affected by the economic crisis.[5]. However, some travel destinations have experienced growth during hard economic times, drawing on low costs of living, accessibility, and friendly immigration laws permitting tourists to stay for extended periods of time. Recession tourism, a phrase coined by Matt Landau in his research about Panama, has evolved as an alternative escape option for nervous crisis-goers in 2009.[citation needed]According to the Bureau of Economic Analysis, direct tourism employment comprises all jobs where the workers are engaged in the production of direct tourism output (such as hotel staff, airline pilots, and souvenir sellers). In the third quarter of 2008, tourism-related employment of 8.6 million jobs in the US consisted of 5.9 million (69%) direct tourism jobs—jobs where workers produce goods and services sold directly to visitors—and 2.7 million (31%) indirect tourism-related jobs. Indirect tourism refers to jobs where workers produce goods and services used to produce what visitors buy. As the US economy struggled, in the fourth quarter of 2008, passenger air transportation continued to contract—falling 13.0% in 2008, after decreasing 20.0% in the third quarter. Spending on domestic flights declined for the fifth consecutive quarter but real spending on international flights rose a modest 1.0% after a sharp decline of 35.4%in the previous quarter. [26]In the USA in 2008, revenue in the tourism industry fell by 3.5% to $1.31 trillion dollars. While still a large amount, tourism revenue fell as unemployment in the country and around the world rose and the international economic recession led to the cancellation of planned trips, including trips to US. [27][edit] Negative impacts This section requires



Monday, 25 May 2009

Hot indian Young Girls romance at Beach with bikini






typically to the air or a heat sink of some variety.n petrol (gasoline) engines, the top compression ring can expose the motor oil to emperatures of 320 °F (160 °C). In diesel engines the top ring can expose the oil to temperatures over 600 °F (315 °C). Motor oils with higher viscosity indices thin less at these higher temperatures.Coating metal parts with oil also keeps them from being exposed to oxygen, inhibiting oxidation at elevated operating temperatures preventing rust or corrosion. Corrosion inhibitors may also be added to the motor oil. Many motor oils also have detergents and dispersants added to help keep the engine clean and minimize oil sludge build-up.ubbing of metal engine parts inevitably produces some microscopic metallic particles from the wearing of the surfaces. Such particles could circulate in the oil and grind against the moving parts, causing erosion and wear. Because particles inevitably build up in the oil, it is typically circulated through an oil filter to remove harmful particles. An oil pump, a vane or gear pump powered by the vehicle engine, pumps the oil throughout the engine, including the oil filter. Oil filters can be a full flow or bypass type.n the crankcase of a vehicle engine, motor oil lubricates rotating or sliding surfaces between the crankshaft journal bearings (main bearings and big-end bearings), and rods connecting the pistons to the crankshaft. The oil collects in an oil pan, or sump, at the bottom of the crankcase. In some small engines such as lawn mower engines, dippers on the bottoms of connecting rods dip into the oil at the bottom and splash it around the crankcase as needed to lubricate parts inside. In modern vehicle engines, the oil pump takes oil from the oil pan and sends it through the oil filter into oil galleries, from which the oil lubricates the main bearings holding the crankshaft up at the main journals and camshaft bearings operating the valves. In typical modern vehicles, oil pressure-fed from the oil galleries to the main bearings enters holes in the main journals of the crankshaft. From these holes in the main journals, the oil moves through passageways inside the crankshaft to exit holes in the rod journals to lubricate the rod bearings and connecting rods. Some simpler designs relied on these rapidly moving parts to splash and lubricate the contacting surfaces between the piston rings and iterior surfaces of the cylinders. However, in modern designs, there are also passageways through the rods which carry oil from the rod bearings to the rod-piston connections and lubricate the contacting surfaces between the piston rings and interior surfaces of the cylinders. This oil film also serves as a seal between the piston rings and cylinder walls to separate the combustion chamber in the cylinder head from the crankcase. The oil then drips back down into the oil pan.[1][2].Other oilsWhile it may still be used in motor vehicles, ATF or Automatic Transmission Fluid is a separate type of specialist lubricating fluid. Varying specifications of ATF are used in automatic gearboxes and some power steering systems, and should not be used to lubricate the engine. It is typically colored dark red to distinguish it from the motor oil and other fluids in the vehiclher non-motor oils include gear or transmission, and differentials oils. These are used in manual gearboxes and driven axles. They could include specialty uses including EP (Extreme Pressure), hypoid, and limited slip functions. Again, they are not to be used for engine lubrication.edit]Non-vehicle oilsther kinds of motors also use motor oil, as well as engines that are not in vehicles such as those for electrical generators. Examples include 4-stroke or 4-cycle internal combustion engines such as those used in many "walk behind" lawn mowers and other engines, and special 2-stroke oil used in 2-stroke or 2-cycle internal combustion engines such as those used in various smaller engines like snow throwers (blowers), chain saws, toy engines like those in model airplanes, certain gardening equipment like weed/grass trimmers, leaf blowers, soil cultivators, etc. Often, the applications are not exposed to as wide a temperature range in use as vehicles, so these oils may be single grade or have less viscosity index improver. 2-cycle oil is used differently from other motor oils in that it is pre-mixed with the gasoline or fuel, often in a gasoline:oil ratio of 25:1, 40:1 or 50:1, and burned in use along with the gasoline.n addition to the 2-cycle oil used if they have gasoline engines, chain saws also separately use "bar and chain oil" for lubricating and cooling the surfaces where the cutting chain moves around the bar.Other examples of mechanical equipment often using oil include oil-driven compressors, vacuum pumps, diffusion pumps, sewing machines and other devices with motors, oil-driven hydraulic equipment, and turbines.The oil properties will vary according to the individual needs of these devices.[edit]PropertiesMost motor oils are made from a heavier, thicker petroleum hydrocarbon base stock derived from crude oil, with additives to improve certain properties. The bulk of a typical motor oil consists of hydrocarbons with between 18 and 34 carbon atoms per molecule.[3] One of the most important properties of motor oil in maintaining a lubricating film between moving parts is its viscosity. The viscosity of a liquid can be thought of as its "thickness" or a quantity of resistance to flow. The viscosity must be high enough to maintain a satisfactory lubricating film, but low enough that the oil can flow around the engine parts satisfactorily to keep them well coated under all conditions. The viscosity index is a measure of how much the oil's viscosity changes as temperature changes. A higher viscosity index indicates the viscosity changes less with temperature than a lower viscosity index.otor oil must be able to flow adequately at the lowest temperature it is expected to experience in order to minimize metal to metal contact between moving parts upon starting up the engine. This property of motor oil is its pour point, defined by ASTM D97 as "...an index of the lowest temperature of its utility..." for a given application.[4]il is largely composed of hydrocarbons which can burn if ignited. Still another important property of motor oil is its flash point, the lowest temperature at which the oil gives off vapors which can ignite. It is dangerous for the oil in a motor to ignite and burn, so a high flash point is desirable. At a petroleum refinery, fractional distillation separates a motor oil fraction from other crude oil fractions, removing the more volatile components, and therefore increasing the oil's flash point.nother manipulated property of motor oil is its Total Base Number (TBN), which is a measurement of the reserve alkalinity of an oil, meaning its ability to neutralize acids. The resulting quantity is determined as mg KOH/ (gram of lubricant). Analogously, Total Acid Number (TAN) is the measure of a lubricant's acidity. Other tests include zinc, phosphorus, or sulfur content, and testing for excessive foaming.The NOACK volatility (ASTM D-5800) Test determines the evaporation loss of lubricants in high temperature service. A maximum of 15% evaporation loss is allowable to meet API SL and ILSAC GF-3 specifications.[edit]GradesRange of Motor Oils on display in KuwaitThe Society of Automotive Engineers, usually abbreviated as SAE, has established a numerical code system for grading motor oils according to their kinematic viscosity. SAE viscosity gradings include the following: 0, 5, 10, 15, 20, 25, 30, 40, 50 or 60. Some of the numbers can be suffixed with the letter W, designating their "winter" or cold-start viscosity, at lower temperature.Viscosity is graded by measuring the time it takes for a standard amount of oil to flow through a standard orifice, at standard temperature. The longer it takes, the higher the viscosity, and thus higher SAE code.Note that the SAE operate a separate viscosity rating system for transmission oils which should not be confused with engine oil viscosity. The higher numbers of a transmission oil (eg 75W-140) do not mean that it is necessarily higher viscosity than an engine oil.[edit]Single-gradeFor single-grade oils, the kinematic viscosity is measured at a reference temperature of 100 °C (212 °F) in units of mm²/s or the equivalent older non-SI units, centistokes (abbreviated cSt). Based on the range of viscosity the oil falls in at that temperature, the oil is graded as an SAE number 0, 5, 10, 20, 30, 40, 50, or 60. The higher the viscosity, the higher the SAE grade number is. These numbers are often referred to as the weight of a motor oil. The reference temperature is meant to approximate the operating temperature to which motor oil is exposed in an engine.The viscosity of single-grade oil derived from petroleum unimproved with additives changes considerably with temperature. As the temperature increases, the viscosity of the oil decreases logarithmically in a relatively predictable manner. On single-grade oils, viscosity testing can be done at cold, winter (W) temperature (as well as checking minimum viscosity at 100 °C/212 °F) to grade an oil as SAE number 0W, 5W, 10W, 15W, 20W, or 25W. A single-grade oil graded at the hot temperature is expected to test into the corresponding grade at the winter temperature; i.e. a 10-grade oil should correspond to a 10W oil. For some applications, such as when the temperature ranges in use are not very wide, single-grade motor oil is satisfactory; for example, lawn mower engines, and vintage or classic cars.[edit]Multi-gradeThe temperature range the oil is exposed to in most vehicles can be wide, ranging from cold ambient temperatures in the winter before the vehicle is started up to hot operating temperatures when the vehicle is fully warmed up in hot summer weather. A specific oil will have high viscosity when cold and a low viscosity at the engine's operating temperature. The difference in viscosities for any single-grade oil is too large between the extremes of temperature. To bring the difference in viscosities closer together, special polymer additives called viscosity index improvers, or VIIs are added to the oil. These additives make the oil a multi-grade motor oil. The idea is to cause the multi-grade oil to have the viscosity of the base number when cold and the viscosity of second number when hot. This enables one type of oil to be generally used all year, and when multi-grades were initially developed, they were frequently described as all-season oil. The viscosity of a multi-grade oil still varies logarithmically with temperature, but the slope representing the change is lessened. This slope representing the change with temperature depends on the nature and amount of the additives to the base oil.The SAE designation for multi-grade oils includes two grade numbers; for example, 10W-30 designates a common multi-grade oil. Historically, the first number associated with the W (again 'W' is for Winter, not Weight) is not rated at any single temperature. The "10W" means that this oil can be pumped by your engine as well as a single-grade SAE 10 oil can be pumped. "5W" can be pumped at a lower temperature than "10W" and "0W" can be pumped at a lower temperature than "5W". The second number, 30, means that the viscosity of this multi-grade oil at 100 °C (212 °F) operating temperature corresponds to the viscosity of a single-grade 30 oil at same temperature. The governing SAE standard is called SAE J300. This "classic" method of defining the "W" rating has since been replaced with a more technical test where a "cold crank simulator" is used at increasingly lowered temps. A 0W oil is tested at −35 °C (−31 °F), a 5W at −30 °C (−22 °F) and a 10W is tested at −25 °C (−13 °F). The real-world ability of an oil to crank in the cold is diminished soon after put into service. The motor oil grade and viscosity to be used in a given vehicle is specified by the manufacturer of the vehicle (although some modern European cars now make no viscosity requirement), but can vary from country to country when climatic or mpg constraints come into play.edit]TurbineTurbine motor oils are designed somewhat differently than reciprocating engine oils traditionally used in automobiles. Deposit control and corrosion are not significant issues when formulating a turbine oil, and the shear stresses that turbine oils are exposed to are minimal in light of the fact that turbines are naturally balanced rotating machines unlike reciprocating engines. Turbine oils tend to have the ISO VG range 32, 46, and 68 (cSt at 40 °C/104 °F), and make extensive use of polyolester, polyalphaolefin, and Group II as base stock due to the high temperatures they must endure. Varnish is the most problematic contaminant, which can only be detected accurately with the ultra centrifuge test resulting in the "UC value".In most aviation gas turbine applications, peak lubricant temperatures are not reached during engine operation, but after shutdown, when heat has been able to migrate from the combustor cans and the compressors into the regions of the engine with lubricated bearings and gearboxes. The gas flow associated with running the turbine provides significant convective cooling that disappears when the engine is shut down, leaving residual heat that causes temperatures within the turbine to rise dramatically, an often-misunderstood phenomenon.[edit]Standards[edit]American Petroleum InstituteThe American Petroleum Institute (API) sets minimum performance standards for lubricants. Motor oil is used for the lubrication, cooling, and cleaning of internal combustion engines. Motor oil may be composed of a lubricant base stock only in the case of non-detergent oil, or a lubricant base stock plus additives to improve the oil's detergency, extreme pressure performance, and ability to inhibit corrosion of engine parts. Lubricant base stocks are categorized into five groups by the API. Group I base stocks are composed of fractionally distilled petroleum which is further refined with solvent extraction processes to improve certain properties such as oxidation resistance and to remove wax. Group II base stocks are composed of fractionally distilled petroleum that has been hydrocracked to further refine and purify it. Group III base stocks have similar characteristics to Group II base stocks, except that Group III base stocks have higher viscosity indexes. Group III base stocks are produced by further hydrocracking of Group II base stocks, or of hydroisomerized slack wax, (a byproduct of the dewaxing process). Group IV base stock are polyalphaolefins (PAOs). Group V is a catch-all group for any base stock not described by Groups I to IV. Examples of group V base stocks include polyol esters, polyalkylene glycols (PAG oils), and perfluoropolyalkylethers (PFPAEs). Groups I and II are commonly referred to as mineral oils, group III is typically referred to as synthetic (except in Germany and Japan, where they must not be called synthetic) and group IV is a synthetic oil. Group V base oils are so diverse that there is no catch-all description.edit]API service classeshe API service classes[5] have two general classifications: S for "service" (originating from spark ignition) (typical passenger cars and light trucks using gasoline engines), and C for "commercial" (originating from compression ignition) (typical diesel equipment).ote that the API oil classification structure has eliminated specific support for wet-clutch motorcycle applications in their descriptors, and API SJ and newer oils are referred to be specific to automobile and light truck use. Accordingly, motorcycle oils are subject to their own uniqu standards.The latest API service standard designation is SM for gasoline automobile and light-truck engines. The SM standard refers to a group of laboratory and engine tests, including the latest series for control of high-temperature deposits. Current API service categories include SM, SL and SJ for gasoline engines. All previous service designations are obsolete, although motorcycle oils commonly still use the SF/SG standard. The obsolete SH standard was the last standard to contain the integral zinc and phosphorus (ZDDP) levels needed for proper lubrication of approx. pre-1990 cars[citation needed]. Oils with higher ZDDP levels are still available from some manufactures, although much information is proprietary.There are seven diesel engine service designations which are current: CJ-4, CI-4 Plus, CI-4, CH-4, CG-4, CF-2, and CF. All others are obsolete.It is possible for an oil to conform to both the gasoline and diesel standards. Engine oil which has been tested and meets the API standards may display the API starburst symbol with the service designation on containers sold to oil users.[6][edit]ILSACThe International Lubricant Standardization and Approval Committee (ILSAC) also has standards for motor oil. Their latest standard, GF-4[7] was approved in 2004. A key test is the Sequence IIIG, which involves running a 3.8 L (232 in³), GM 3.8 L V-6 at 125 hp (93 kW), 3,600 rpm, and 150 °C (300 °F) oil temperature for 100 hours. These are much more severe conditions than any API-specified oil was designed for: cars which typically push their oil temperature consistently above 100 °C (212 °F) are most turbocharged engines, along with most engines of European or Japanese origin, particularly small capacity, high power output.The IIIG test is about 50% more difficult[8] than the previous IIIF test, used in GF-3 and API SL oils. Engine oils bearing the API starburst symbol since 2005 are ILSAC GF-4 compliant.[9][edit]ACEAThe ACEA (Association des Constructeurs Européens d'Automobiles) performance/quality classifications A3/A5 tests used in Europe are arguably more stringent than the API and ILSAC standards. CEC (The Co-ordinating European Council) is the development body for fuel and lubricant testing in Europe and beyond, setting the standards via their European Industry groups; ACEA, ATIEL, ATC and CONCAWE.[edit]JASOThe Japanese Automotive Standards Organization (JASO) has come up with their own set of erformance and quality standards for petrol engines of Japanese origin.For 4-stroke gasoline engines, the JASO T904 standard is used, and is particularly relevant to motorcycle engines. The JASO T904-MA and MA2 standards are designed to distinguish oils that are approved for wet clutch use, and the JASO T904-MB standard is not suitable for wet clutch use.For 2-stroke gasoline engines, the JASO M345 (FA, FB, FC) standard is used, and this refers particularly to low ash, lubricity, detergency, low smoke and exhaust blocking.These standards, especially JASO-MA and JASO-FC, are designed to address oil-requirement issues not addressed by the API service categories.[edit]OEM standards divergenceBy the early 1990s, many of the European original equipment manufacturer (OEM) car manufacturers felt that the direction of the American API oil standards was not compatible with the needs of a motor oil to be used in their motors. As a result many leading European motor manufacturers created and developed their own "OEM" oil standards.Probably the most well known of these are the VW50*.0* series from Volkswagen Group, and the MB22*.** from Mercedes-Benz. Other European OEM standards are from General Motors, for the Vauxhall, Opel and Saab brands, the Ford "WSS" standards, BMW Special Oils and BMW Longlife standards, Porsche, and the PSA Group of Peugeot and Citroën. General Motors also has the 4718M standard that is used for the Chevrolet Corvette, a standard that is used in North America for selected North American performance engines, with a "Use Mobil 1 only" sticker usually placed on those cars.[citation needed]In recent times, very highly specialised "extended drain" "longlife" oils have arisen, whereby, taking Volkswagen Group vehicles, a petrol engine can now go up to 2 years or 30,000 km (~18,600 mi), and a diesel engine can go up to 2 years or 50,000 km (~31,000 mi) - before requiring an oil change. BMW, GM, Mercedes and PSA all have their own similar longlife oil standards.[citation needed]Furthermore, virtually all European OEM standards require a long duration of longevity of the HTHS (High Temperature, High Shear) viscosity, many around the 3.5 cP (3.5 mPa·s).Because of the real or perceived need for motor oils with unique qualities, many modern European cars will demand a specific OEM-only oil standard. As a result, they may make no reference at all to API standards, nor SAE viscosity grades. They may also make no primary reference to the ACEA standards, with the exception of being able to use a "lesser" ACEA grade oil for "emergency top-up", though this usually has strict limits, often up to a maximum of ½ a litre of non-OEM oil.[edit]Other additivesIn addition to the viscosity index improvers, motor oil manufacturers often include other additives such as detergents and dispersants to help keep the engine clean by minimizing sludge buildup, corrosion inhibitors, and alkaline additives to neutralize acidic oxidation products of the oil. Most commercial oils have a minimal amount of zinc dialkyldithiophosphate as an anti-wear additive to protect contacting metal surfaces with zinc and other compounds in case of metal to metal contact. The quantity of zinc dialkyldithiophosphate is limited to minimize adverse effect on catalytic converters.There are other additives available commercially which can be added to the oil by the user for purported additional benefit. Some of these additives include:Zinc dialkyldithiophosphate (ZDDP) additives, which typically also contain calcium, are available to consumers for additional protection under extreme-pressure conditions or in heavy duty performance situations. ZDDP and calcium additives are also added to protect motor oil from oxidative breakdown and to prevent the formation of sludge and varnish deposits.In the 1980s and 1990s, additives with suspended PTFE particles were available to consumers to increase motor oil's ability to coat and protect metal surfaces. There is controversy as to the actual effectiveness of these products as they can solidify and clog the oil filters.Some molybdenum disulfide containing additives to lubricating oils are claimed to reduce friction, bond to metal, or have anti-wear properties.Various other extreme-pressure additives and antiwear additives.[edit]Synthetic oil and synthetic blendsSynthetic lubricants were first synthesized, or man-made, in significant quantities as replacements for mineral lubricants (and fuels) by German scientists in the late 1930s and early 1940s because of their lack of sufficient quantities of crude for their (primarily military) needs. A significant factor in its gain in popularity was the ability of synthetic-based lubricants to remain fluid in the sub-zero temperatures of the Eastern front in wintertime, temperatures which caused petroleum-based lubricants to solidify due to their higher wax content. The use of synthetic lubricants widened through the 1950s and 1960s due to a property at the other end of the temperature spectrum, the ability to lubricate aviation engines at temperatures that caused mineral-based lubricants to break down. In the mid 1970s, synthetic motor oils were formulated and commercially applied for the first time in automotive applications. The same SAE system for designating motor oil viscosity also applies to synthetic oils.Instead of making motor oil with the conventional petroleum base, "true" synthetic oil base stocks are artificially synthesized. Synthetic oils are derived from either Group III mineral base oils, Group IV, or Group V non-mineral bases. True synthetics include classes of lubricants like synthetic esters as well as "others" like GTL (Methane Gas-to-Liquid) (Group V) and polyalpha-olefins (Group IV). Higher purity and therefore better property control theoretically means synthetic oil has good mechanical properties at extremes of high and low temperatures. The molecules are made large and "soft" enough to retain good viscosity at higher temperatures, yet branched molecular structures interfere with solidification and therefore allow flow at lower temperatures. Thus, although the viscosity still decreases as temperature increases, these synthetic motor oils have a much improved viscosity index over the traditional petroleum base. Their specially designed properties allow a wider temperature range at higher and lower temperatures and often include a lower pour point. With their improved viscosity index, true synthetic oils need little or no viscosity index improvers, which are the oil components most vulnerable to thermal and mechanical degradation as the oil ages, and thus they do not degrade as quickly as traditional motor oils. However, they still fill up with particulate matter, although at a lower rate compared to conventional oils, and the oil filter still fills and clogs up over time. So, periodic oil and filter changes should still be done with synthetic oil; but some synthetic oil suppliers suggest that the intervals between oil changes can be longer, sometimes as long as 16,090-24,140 km (10,000–15,000 mi).With improved efficiency, synthetic lubricants are designed to make wear and tear on gears far less than with petroleum-based lubricants, reduce the incidence of oil oxidation and sludge formation, and allow for "long life" extended drain intervals. Today, synthetic lubricants are available for use in modern automobiles on nearly all lubricated components, potentially with superior performance and longevity as compared to non-synthetic alternatives. Some tests[citation needed] have shown that fully synthetic oil is superior to conventional oil in many respects, providing better engine protection, performance, and better flow in cold starts than petroleum-based motor oil.[edit]MaintenanceIn engines, there is inevitably some exposure of the oil to products of internal combustion, and microscopic coke particles from black soot accumulate in the oil during operation. Also the rubbing of metal engine parts inevitably produces some microscopic metallic particles from the wearing of the surfaces. Such particles could circulate in the oil and grind against the part surfaces causing wear. The oil filter removes many of the particles and sludge, but eventually the oil filter can become clogged, if used for extremely long periods. The motor oil and especially the additives also undergo thermal and mechanical degradation. For these reasons, the oil and the oil filter need to be periodically replaced.The vehicle manufacturer may specify which SAE viscosity grade of oil should be used for the vehicles it produces, but many different weights can actually be used. Some manufacturers have specific quality test requirements or "specs" for service in their particular make. In the USA, most quick oil change shops recommended intervals of 4,830 km (3,000 mi) or every 3 months.With a degree of ambiguity about how many miles motor oil is actually good for, some people opt for a more convenient time-based schedule. Seasonal changes are desirable where the viscosity can be adjusted for the ambient temperature change, thicker for summer heat and thinner for the winter cold. As a general rule, the thinnest oil that does not produce excess wear is used. Time-based intervals account for both the short trip driver who does fewer miles, but builds up more contaminates, as well as the long highway trips that are much easier on the oil. Many modern cars now list somewhat higher intervals for changing of oil and filter, with the constraint of "severe" service requiring more frequent changes with less-than ideal driving; contrary to what most people think, this applies to short trips of under 16 km (10 mi), where the oil does not get to full operating temps long enough to burn off condensation, excess fuel, and other contamination that leads to "sludge", "varnish", "acids", or other deposits. In contrast, an engine which runs continually for hours, such as for a taxi, or long-distance driving, is considered "normal" service. Many manufacturers have engine computer calculations to estimate the oil's condition based on the factors which degrade it such as RPMs, temperatures, and trip length; and one system adds an optical sensor for determining the clarity of the oil in the engine. These systems are commonly known as Oil Life Monitors or OLMs. Over the years, manufacturers have been able to reduce the viscosity of oil needed to correctly lubricate the engine and extend the duration of the servicable life. In the 1970s, typical cars took heavy 10W-40 oil which was used for a duration of 3,220 km (2,000 mi) or less. In the 1980s, 5W-30 oils were introduced to improve gas mileage and engine performance. A modern typical application would be Honda Motor's use of 5W-20 viscosity oil for 12,070 km (7,500 mi) without excess wear or deposits, while offering maximum mpg. Most other manufacturers use 20-weight oils as well. The latest API "SM" spec offers a substantially better product than preceding specifications.[edit]FutureA process to break down polyethylene, a common plastic product found in many consumer containers, is used to make wax with the correct molecular properties for conversion into a lubricant, bypassing the expensive Fischer-Tropsch process. The plastic is melted and then pumped into a furnace. The heat of the furnace breaks down the molecular chains of polyethylene into wax. Finally, the wax is subjected to a catalytic process that alters the wax's molecular structure, leaving a clear oil. (Miller, et al., 2005)New Biodegradable Auto Oil is making an appearance on the market. This oil is formed from the fats of cattle. The benefit of this new form of motor oil is its ability to get back into soil with fewer negative nsequences. Typical motor oil needs to go through special treatment facilities, whereas biodegradable motor oil has less impact on the environment if spilled on the ground. All used motor oils can contain toxic heavy metals, however, and even biodegradable oils should be recycled properly.

blogger templates | Make Money Online